Authority marine will respond promptly to any destination in the tri state area. Our factory trained technicians will arrive in a fully equipped service truck, ready to accurately diagnose and repair any transmission related problems you may have.
If your transmission is making rattling noises or you are encountering problems such as slow engagement or slippage give us a call before major damage to your transmission occurs. We specialize in marine transmissions for pleasure and commercial craft. Whether you have a ZF, twin disc or velvet drive you can be assured that Authority Marine will take care of your problem in the most cost effective, timely and professional manner possible. When we rebuild a transmission it is completely disassembled and every part inspected for wear and damage. All seals gaskets and clutches are replaced as well as any other parts that may be damaged. The transmission is then tested on our test stand to check for leaks, clutch pressure and lube pressure. This ensures that the transmission is ready to be installed in the boat with no problems after installation. Many problems can be repaired in the boat depending on the model transmission you have and the problem you are encountering. This is why you should give us a call to determine whether your transmission even needs to be removed from the boat. We are professionals and can remove most transmissions from vessel without removing the engine or hauling boat out of the water as many service facilities will tell you. This can save you money in extra labor and marina fees.
1 All seals, gaskets, damaged and worn parts replaced.
2 All parts are thoroughly cleaned and transmission is assembled.
3 Transmission is then installed on test stand to check for leaks, lube and clutch pressure.
4 Transmission is then painted and ready for installation.